A $0.5 ~\rm m$ long coax cable is used for signal transmission. The diagram shows the cross-section of the coax cable with the origin in the center of the coax cable. Due to the given load, the following situation appears:
1. What is the magnitude of the magnetic field strength $H$ at $\rm (0.1 ~mm | 0)$ and $\rm (0.55 ~mm | 0)$?
The magnitude of the magnetic field strength $H$ can be calculated by: $H = {{I}\over{2 \pi \cdot r}} $
So, we get for $H_{\rm i}$ at $\rm (0.1 ~mm | 0)$, and $H_{\rm o}$ at $\rm (0.55 ~mm | 0)$:
\begin{align*} H_{\rm i} &= {{I}\over{2 \pi \cdot r_{\rm i}}} \\ &= {{+3.3 A}\over{2 \pi \cdot { 0.1 \cdot 10^{-3}~\rm m}}} \\ H_{\rm o} &= {{I}\over{2 \pi \cdot r_{\rm o}}} \\ &= {{+3.3 A}\over{2 \pi \cdot { 0.55 \cdot 10^{-3}~\rm m}}} \\ \end{align*}
Hint: For the direction, one has to consider the right-hand rule.
By this, we see that the $H$-field on the right side points downwards.
Therefore, the sign of the $H$-field is negative.
But here, only the magnitude was questioned!
2. Plot the graph of the magnitude of $H(x)$ with $x \in \rm [-0.6~mm, +0.6~mm]$ from $\rm (-0.6 ~mm | 0)$ to $\rm (0.6 ~mm | 0)$ in one diagram. Use proper dimensions and labels for the diagram!
3. What is the magnitude of the electric displacement field $D$ at $\rm (-0.1 ~mm | 0)$ and $\rm (0.55 ~mm | 0)$?
So, we get for $D_{\rm i}$ at $\rm (0.1 ~mm | 0)$, and $D_{\rm o}$ at $\rm (0.55 ~mm | 0)$:
\begin{align*} D_{\rm i} &= {{Q }\over{2 \pi \cdot r_{\rm i} \cdot l}} \\ &= {{10 \cdot 10^{-9} C}\over{2 \pi \cdot { 0.1 \cdot 10^{-3}~\rm m} \cdot 0.5 ~\rm m}} \\ D_{\rm o} &= {{Q }\over{2 \pi \cdot r_{\rm o} \cdot l}} \\ &= {{10 \cdot 10^{-9} C}\over{2 \pi \cdot { 0.55 \cdot 10^{-3}~\rm m}\cdot 0.5 ~\rm m}} \\ \end{align*}
Hint: For the direction, one has to consider the sign of the enclosed charge.
By this, we see that the $D$-field is positive.
But here, again only the magnitude was questioned!
4. Plot the graph of the magnitude of $D(x)$ with $x \in \rm [-0.6~mm, +0.6~mm]$ from $\rm (-0.6 ~mm | 0)$ to $\rm (0.6 ~mm | 0)$ in one diagram. Use proper dimensions and labels for the diagram!