DW EditSeite anzeigenÄltere VersionenLinks hierherAlles aus-/einklappenNach oben Diese Seite ist nicht editierbar. Sie können den Quelltext sehen, jedoch nicht verändern. Kontaktieren Sie den Administrator, wenn Sie glauben, dass hier ein Fehler vorliegt. CKG Editor <WRAP pagebreak></WRAP><panel type="info" title="Exercise 4.3.1 Instrument amplifier"> <WRAP group><WRAP column 2%>{{fa>pencil?32}}</WRAP><WRAP column 92%> Find out through an internet research, as the instrument amplifier works. \\ - Consider the <wrap noprint>unten</wrap><wrap onlyprint>im Wiki unter [[https://wiki.mexle.org/elektronische_schaltungstechnik/4_grundschaltungen_ii#instrumentenverstaerker|4 Grundschaltungen II : Instrumentenverstärker]]</wrap> illustrated Falstad Simulation and change the variable resistance. Especially analyze the minimum and maximum value of the output voltage. This is possible by moving with the mouse pointer over the output signal. - What happens if you remove the variable resistance and leave the connections open? Which circuit have the OPVs at the entrance? <wrap onlyprint> \\ \\ \\ \\ \\ \\ \\ \\ \\ \\ \\ \\ \\ \\ \\ \\ </wrap> - Compare the following situations. What is to be determined? - Variable resistance is replaced by resistance with 2 kOhm. - Variable resistance is replaced at the top connection by 1 kOhm against mass and below by 1 kohm against mass. - Variable resistance is replaced at the top connection by 1 kOhm against a voltage source with 1 V and below by 1 kOhm against 1 V. <wrap onlyprint> \\ \\ \\ \\ \\ \\ \\ \\ \\ \\ \\ \\ \\ \\ \\ \\ \\ \\ \\ \\ \\ \\ \\ \\ </wrap> - Which transmission equation does the initial construction, if all resistances (up to the variable resistance $R_G$) have the same value $R$? $U_A=F(U_2,U_1,R_G,R)=?$<wrap onlyprint> \\ \\ \\ \\ \\ \\ \\ \\ \\ \\ \\ \\ \\ \\ \\ \\ </wrap> - What are the advantages for the instrument amplifier to the differential amplifier? <wrap onlyprint> \\ \\ \\ \\ \\ \\ \\ \\ \\ \\ \\ \\ \\ \\ </wrap> </WRAP></WRAP></panel>