===== Block plan =====

<callout>
[[introduction_in_eee1|Introduction in Electrical Engineering 2]] 
</callout>
<WRAP group >
<WRAP column half>
<callout>
**Chapter 1 — Switching operations in DC networks** 
  * [[block01|Bl. 01+02 — Charging/discharging an RC element]] 
</callout>

<callout>
**Chapter 2 — AC Networks**
(approx. 5 blocks, based on previous lectures on [[electrical_engineering_1:introduction_in_alternating_current_technology|Intro to AC]] and [[electrical_engineering_1:circuits_under_different_frequencies|AC circuits]])
  * [[block03|Block 03 — Sinusoidal quantities and L, C in AC]]
  * [[block04|Bl. 04/05 — Complex calculation]]
  * [[block06|Bl. 06/07 — Complex Power]]
  * [[block08|Block 08 — Oscillating circuits]]
  * [[block09|Block 09/10 —  Magnetically coupled coils]]
</callout>
</WRAP>
<WRAP column half>
<callout>

**Chapter 3 — Semiconductor Components** 
(approx. 4 blocks, based on previous lectures on [[circuit_design:2_diodes|Diodes]] and [[circuit_design:2_transistors|Transistors]] )
  * [[block11|Block 11 — Semiconductor Fundamentals and Diodes]]
  * [[block12|Block 12 — Application of Diodes]]
  * [[block13|Block 13 — Transitors]]
  * [[block14|Block 14 — Application of Transistors]]
</callout>

</WRAP></WRAP>

[[Old exams]]