1. Switching operations in direct current networks (approx. 3 blocks)
   1. Charging/discharging an RC element
   2. Switching coils
   3. Magnetically coupled coils
2. Alternating current networks (approx. 5 blocks)
   1. Representation of sinusoidal quantities
   2. Example: RC element
   3. Capacitor with alternating voltage
   4. Coil with alternating voltage
   5. Complex calculation of networks with R, L, C (“recipe” for procedure)
   6. Graphical solution of networks with R, L, C (RC element, RL element)
   7. Power (effective value, power factor, active/apparent/reactive power, loss factor, loss angle)
   8. Components R, L, C with alternating current
   9. Reactive power compensation
   10. Oscillating circuits
3. Semiconductor components (approx. 4 blocks)
   1. Fundamentals (conductors, semiconductors, insulators, doping, band model, intrinsic conductivity)
   2. Diodes (real characteristic curve, operating point, equivalent circuit)
   3. Zener diode
   4. LED
   5. Protective circuit with diodes
   6. Rectifier circuits (single-phase rectifier, center tap circuit, bridge rectifier, smoothing capacitor)
   7. Bipolar transistor (structure, designations, characteristic curve, characteristic values)
   8. Transistor as a switch (circuit, switching times and behavior)
   9. MOSFET (structure, comparison with bipolar transistor)
   10. Optional: Transistor as an amplifier

Old lecture notes:

Electrics
1 The electrostatic Field
2 The stationary electric Flow

Magnetics
3 The magnetostatic Field
4 time-dept. magnetic Field
5 Magnetic Circuits

Electromagnetic Applic.
6 Inductances in Circuits
7 Polyphase Networks
8 The Transformer

old exams