Unterschiede
Hier werden die Unterschiede zwischen zwei Versionen angezeigt.
| Beide Seiten der vorigen Revision Vorhergehende Überarbeitung Nächste Überarbeitung | Vorhergehende Überarbeitung Nächste Überarbeitung Beide Seiten der Revision | ||
|
electrical_engineering_1:dc_circuit_transients [2021/11/22 04:50] tfischer |
electrical_engineering_1:dc_circuit_transients [2022/04/22 21:16] tfischer |
||
|---|---|---|---|
| Zeile 1: | Zeile 1: | ||
| - | ====== 5. DC Circuit Transients (ob RC elements) ====== | + | ====== 5. DC Circuit Transients (on RC elements) ====== |
| <WRAP onlyprint> | <WRAP onlyprint> | ||
| Zeile 63: | Zeile 63: | ||
| < | < | ||
| - | === Goals === | + | === Learning Objectives |
| - | After this lesson, you should: | + | By the end of this section, you will be able to: |
| - | + | - know the time constant $\tau$ and in particularly | |
| - | - know the time constant $\tau$ and in particular be able to calculate it. | + | - determine the time characteristic of the currents and voltages at the RC element for a given resistance and capacitance. |
| - | - Be able to determine the time characteristic of the currents and voltages at the RC element for a given resistance and capacitance. | + | |
| - know the continuity conditions of electrical quantities. | - know the continuity conditions of electrical quantities. | ||
| - know when (=according to which measure) the capacitor is considered to be fully charged / discharged, i.e. a steady state can be considered to have been reached. | - know when (=according to which measure) the capacitor is considered to be fully charged / discharged, i.e. a steady state can be considered to have been reached. | ||
| Zeile 334: | Zeile 333: | ||
| < | < | ||
| - | === Goals === | + | === Learning Objectives |
| - | + | ||
| - | After this lesson, you should: | + | |
| - | - Be able to calculate the energy content in a capacitor. | + | By the end of this section, you will be able to: |
| - | - Be able to calculate the change in energy of a capacitor resulting from a change in voltage between the capacitor terminals. | + | - calculate the energy content in a capacitor. |
| - | - Be able to calculate (initial) current, (final) voltage and charge when balancing the charge of several capacitors (also via resistors). | + | - calculate the change in energy of a capacitor resulting from a change in voltage between the capacitor terminals. |
| + | - calculate (initial) current, (final) voltage and charge when balancing the charge of several capacitors (also via resistors). | ||
| </ | </ | ||