Unterschiede

Hier werden die Unterschiede zwischen zwei Versionen angezeigt.

Link zu dieser Vergleichsansicht

Beide Seiten der vorigen Revision Vorhergehende Überarbeitung
Nächste Überarbeitung Beide Seiten der Revision
electrical_engineering_1:dc_circuit_transients [2022/03/23 15:58]
tfischer
electrical_engineering_1:dc_circuit_transients [2022/04/22 21:16]
tfischer
Zeile 63: Zeile 63:
 <callout> <callout>
  
-=== Goals ===+=== Learning Objectives ===
  
-After this lesson, you should: +By the end of this section, you will be able to
- +  - know the time constant $\tau$ and in particularly calculate it. 
-  - know the time constant $\tau$ and in particular be able to calculate it. +  - determine the time characteristic of the currents and voltages at the RC element for a given resistance and capacitance.
-  - Be able to determine the time characteristic of the currents and voltages at the RC element for a given resistance and capacitance.+
   - know the continuity conditions of electrical quantities.   - know the continuity conditions of electrical quantities.
   - know when (=according to which measure) the capacitor is considered to be fully charged / discharged, i.e. a steady state can be considered to have been reached.   - know when (=according to which measure) the capacitor is considered to be fully charged / discharged, i.e. a steady state can be considered to have been reached.
Zeile 334: Zeile 333:
 <callout> <callout>
  
-=== Goals === +=== Learning Objectives ===
- +
-After this lesson, you should:+
  
-  - Be able to calculate the energy content in a capacitor. +By the end of this section, you will be able to
-  - Be able to calculate the change in energy of a capacitor resulting from a change in voltage between the capacitor terminals. +  - calculate the energy content in a capacitor. 
-  - Be able to calculate (initial) current, (final) voltage and charge when balancing the charge of several capacitors (also via resistors).+  - calculate the change in energy of a capacitor resulting from a change in voltage between the capacitor terminals. 
 +  - calculate (initial) current, (final) voltage and charge when balancing the charge of several capacitors (also via resistors).
  
 </callout> </callout>