Unterschiede

Hier werden die Unterschiede zwischen zwei Versionen angezeigt.

Link zu dieser Vergleichsansicht

Beide Seiten der vorigen Revision Vorhergehende Überarbeitung
electrical_engineering_and_electronics_2:start [2025/12/06 13:29] – mexleadminelectrical_engineering_and_electronics_2:start [2026/03/03 05:34] (aktuell) – mexleadmin
Zeile 1: Zeile 1:
-  - Switching operations in direct current networks \\ (approx. 3 blocks, based on previous lectures on [[electrical_engineering_1:dc_circuit_transients|DC transients]] ) +===== Block plan ===== 
-    - Charging/discharging an RC element + 
-    -  Switching coils +<callout> 
-    - Magnetically coupled coils \\ \\ +[[introduction_in_eee1|Introduction in Electrical Engineering 2]]  
-  - Alternating current networks \\ (approx. 5 blocks, based on previous lectures on [[electrical_engineering_1:introduction_in_alternating_current_technology|Intro to AC]] and [[electrical_engineering_1:circuits_under_different_frequencies|AC circuits]]) +</callout> 
-    - Representation of sinusoidal quantities +<WRAP group > 
-    - Example: RC element +<WRAP column third> 
-    - Capacitor with alternating voltage +<callout> 
-    - Coil with alternating voltage +**Chapter 1 — Switching operations in DC networks**  
-    - Complex calculation of networks with R, L, C (“recipe” for procedure) +(approx. 3 blocks, based on previous lectures on [[electrical_engineering_1:dc_circuit_transients|DC transients]] ) 
-    - Graphical solution of networks with R, L, C (RC element, RL element) +  * [[block01|Block 01 — Charging/discharging an RC element]]  
-    - Power (effective value, power factor, active/apparent/reactive power, loss factor, loss angle) +  * [[block02|Block 02 — Switching coils]]  
-    - Components R, L, C with alternating current +  * [[block03|Block 03 — Magnetically coupled coils]] 
-    - Reactive power compensation +</callout> 
-    - Oscillating circuits \\ \\ + 
-  - Semiconductor components \\ (approx. 4 blocks, based on previous lectures on [[circuit_design:2_diodes|Diodes]] and [[circuit_design:2_transistors|Transistors]] ) +</WRAP> 
-    - Fundamentals (conductors, semiconductors, insulators, doping, band model, intrinsic conductivity) +<WRAP column third> 
-    - Diodes (real characteristic curve, operating point, equivalent circuit) +<callout> 
-    - Zener diode +**Chapter 2 — AC Networks** 
-    - LED +(approx. 5 blocks, based on previous lectures on [[electrical_engineering_1:introduction_in_alternating_current_technology|Intro to AC]] and [[electrical_engineering_1:circuits_under_different_frequencies|AC circuits]]) 
-    - Protective circuit with diodes +  * [[block04|Block 04 — Sinusoidal quantities and L, C in AC]] 
-    - Rectifier circuits (single-phase rectifier, center tap circuit, bridge rectifier, smoothing capacitor) +  * [[block05|Block 05 — Complex calculation]] 
-    - Bipolar transistor (structure, designations, characteristic curve, characteristic values) +  * [[block06|Block 06 — Complex Power]] 
-    - Transistor as a switch (circuit, switching times and behavior) +  * [[block07|Block 07 — R, L, C with alternating current]] 
-    - MOSFET (structure, comparison with bipolar transistor) +  * [[block08|Block 08 — Oscillating circuits]] 
-    - Optional: Transistor as an amplifier+</callout> 
 +</WRAP> 
 +<WRAP column third> 
 +<callout> 
 + 
 +**Chapter 3 — Semiconductor Components**  
 +(approx. 4 blocks, based on previous lectures on [[circuit_design:2_diodes|Diodes]] and [[circuit_design:2_transistors|Transistors]] ) 
 +  * [[block09|Block 09 — Semiconductor Fundamentals and Diodes]] 
 +  * [[block10|Block 10 — Application of Diodes]] 
 +  * [[block11|Block 11 — Transitors]] 
 +  * [[block12|Block 12 — Application of Transistors]] 
 +</callout> 
 +</WRAP></WRAP>