Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision		 Previous revision
lab_electrical_engineering:1_resistors:resistance-measurement [2026/03/10 03:21] – mexleadminlab_electrical_engineering:1_resistors:resistance-measurement [2026/03/10 03:43] (current) – mexleadmin
Line 15: Line 15:
 Determine the nominal and measured values of the resistance for $R_{\rm 1}$ (brown, green, orange), $R_{\rm 2}$ (yellow, violet, red), $R_{\rm 3}$ (red, violet, red) and the incandescent lamp $R_{\rm L}$. Also measure the approximate resistance $R_{\rm K}$ of your body from your right to your left hand. Determine the nominal and measured values of the resistance for $R_{\rm 1}$ (brown, green, orange), $R_{\rm 2}$ (yellow, violet, red), $R_{\rm 3}$ (red, violet, red) and the incandescent lamp $R_{\rm L}$. Also measure the approximate resistance $R_{\rm K}$ of your body from your right to your left hand.
  
-{{drawio>Table-1_V2.svg}}+{{drawio>lab_electrical_engineering:1_resistors:Table-1_V2.svg}}
 <tabcaption Table-1_V2 | Direct resistance measurement> </tabcaption>     <tabcaption Table-1_V2 | Direct resistance measurement> </tabcaption>    
 \\  \\ 
Line 35: Line 35:
 <wrap onlyprint> \\ \\  </wrap> \\ <wrap onlyprint> \\ \\  </wrap> \\
  
-{{drawio>Table-2_V1-Serial+parallel.svg}}+{{drawio>lab_electrical_engineering:1_resistors:Table-2_V1-Serial+parallel.svg}}
 <tabcaption Table-2_V1 | Series and parallel connections> </tabcaption>  <tabcaption Table-2_V1 | Series and parallel connections> </tabcaption> 
 \\ \\
Line 48: Line 48:
 Build the measuring circuit shown in <imgref Fig-1_V1> for each of the three resistors and set the voltage on the power supply to $~{\rm 12} ~{ V}$. Build the measuring circuit shown in <imgref Fig-1_V1> for each of the three resistors and set the voltage on the power supply to $~{\rm 12} ~{ V}$.
  
-{{drawio>Fig-1_V1-indirect-measurement.svg}}+{{drawio>lab_electrical_engineering:1_resistors:Fig-1_V1-indirect-measurement.svg}}
 <imgcaption Fig-1_V1 | Indirect resistance measurement> </imgcaption> <imgcaption Fig-1_V1 | Indirect resistance measurement> </imgcaption>
  
 Measure $U_{\rm n}$ [V] and $I_{\rm n}$ [mA]. Calculate $R_{\rm n}$ [k$\Omega$] from these values. Measure $U_{\rm n}$ [V] and $I_{\rm n}$ [mA]. Calculate $R_{\rm n}$ [k$\Omega$] from these values.
  
-{{drawio>Table-3_V1-indirect-measurement.svg}}+{{drawio>lab_electrical_engineering:1_resistors:Table-3_V1-indirect-measurement.svg}}
 <tabcaption Table-3_V1 | Indirect resistance measurement> </tabcaption>    <tabcaption Table-3_V1 | Indirect resistance measurement> </tabcaption>