Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision		 Previous revision
lab_electrical_engineering:2_capacitors:periodic-signals-on-scope [2026/03/21 20:55] – mexleadminlab_electrical_engineering:2_capacitors:periodic-signals-on-scope [2026/03/21 23:00] (current) – mexleadmin
Line 3: Line 3:
 Build the following circuit in <imgref Fig-6_V2-periodic-signals> with the function generator and the oscilloscope. Build the following circuit in <imgref Fig-6_V2-periodic-signals> with the function generator and the oscilloscope.
  
-{{drawio>Fig-6_V2-periodic-signals.svg}}\\+{{drawio>lab_electrical_engineering:2_capacitors:Fig-6_V2-periodic-signals.svg}}\\
 <imgcaption Fig-6_V2-periodic-signals | Periodic signals on the oscilloscope> </imgcaption> <imgcaption Fig-6_V2-periodic-signals | Periodic signals on the oscilloscope> </imgcaption>
 +\\ \\ \\ 
 Set the signals listed in <tabref Table-1-Signals_V2> on the function generator and draw the corresponding oscilloscope screen images. The signal display on the oscilloscope should optimally fill the screen Set the signals listed in <tabref Table-1-Signals_V2> on the function generator and draw the corresponding oscilloscope screen images. The signal display on the oscilloscope should optimally fill the screen
  
-{{drawio>Table-1-Signals_V2.svg}}\\+{{drawio>lab_electrical_engineering:2_capacitors:Table-1-Signals_V2.svg}}
 <tabcaption Table-1-Signals_V2 | Signals> </tabcaption> <tabcaption Table-1-Signals_V2 | Signals> </tabcaption>
-\\+\\ \\ \\ 
 Also document the settings of the used channels, the time base, and the GND line on the left side of the screen drawings. Also document the settings of the used channels, the time base, and the GND line on the left side of the screen drawings.
  
 <wrap left> <wrap left>
-{{drawio>Fig-7_V2-Sine-1kHz-U-1,8V.svg}}\\+{{drawio>lab_electrical_engineering:2_capacitors:Fig-7_V2-Sine-1kHz-U-1,8V.svg}}
 <imgcaption Fig-7_V2-Sine-1kHz-U-1,8V | Sine, f = 1 kHz, U = 1.8V> </imgcaption> <imgcaption Fig-7_V2-Sine-1kHz-U-1,8V | Sine, f = 1 kHz, U = 1.8V> </imgcaption>
 </wrap> </wrap>
Line 24: Line 24:
 ---- ----
 <wrap left> <wrap left>
-{{drawio>Fig-8_V2-Triangle-4kHz-U-3V.svg}}\\+{{drawio>lab_electrical_engineering:2_capacitors:Fig-8_V2-Triangle-4kHz-U-3V.svg}}
 <imgcaption FFig-8_V2-Triangle-4kHz-U-3V | Triangle, f = 4 kHz, U = 3 V> </imgcaption> <imgcaption FFig-8_V2-Triangle-4kHz-U-3V | Triangle, f = 4 kHz, U = 3 V> </imgcaption>
 </wrap> </wrap>
Line 33: Line 33:
 ~~PAGEBREAK~~ ~~CLEARFIX~~ ~~PAGEBREAK~~ ~~CLEARFIX~~
 ---- ----
 +\\ \\ \\ \\ \\ \\ \\ \\ \\ \\ \\ \\
 +
 <wrap left> <wrap left>
-{{drawio>Fig-9_V2-Rectangle-unipolar-2kHz-U-5V.svg}}\\+{{drawio>lab_electrical_engineering:2_capacitors:Fig-9_V2-Rectangle-unipolar-2kHz-U-5V.svg}}
 <imgcaption Fig-9_V2-Rectangle-unipolar-2kHz-U-5V | Rectangle, unipolar, f = 2 kHz, U = 5 V> </imgcaption> <imgcaption Fig-9_V2-Rectangle-unipolar-2kHz-U-5V | Rectangle, unipolar, f = 2 kHz, U = 5 V> </imgcaption>
 </wrap> </wrap>
- 
 Channel 1:  $ \frac{V}{\rm DIV} =  $ \\ \\ Channel 1:  $ \frac{V}{\rm DIV} =  $ \\ \\
 Time basis: $ \frac{T}{\rm DIV} =  $ \\  Time basis: $ \frac{T}{\rm DIV} =  $ \\ 
Line 44: Line 45:
 ---- ----
 <wrap left> <wrap left>
-{{drawio>Fig-10_V2-Rectangle-bipolar-5kHz-U-2V.svg}}\\+{{drawio>lab_electrical_engineering:2_capacitors:Fig-10_V2-Rectangle-bipolar-5kHz-U-2V.svg}}
 <imgcaption Fig-10_V2-Rectangle-bipolar-5kHz-U-2V | Rectangle, bipolar, f = 5 kHz, U = 2 V> </imgcaption> <imgcaption Fig-10_V2-Rectangle-bipolar-5kHz-U-2V | Rectangle, bipolar, f = 5 kHz, U = 2 V> </imgcaption>
 </wrap> </wrap>
Line 54: Line 55:
 ---- ----
 <wrap left> <wrap left>
-{{drawio>Fig-11_V2-Sine-DC-Offset-2,5kHz-U-4V-UDC-2V.svg}}\\+{{drawio>lab_electrical_engineering:2_capacitors:Fig-11_V2-Sine-DC-Offset-2,5kHz-U-4V-UDC-2V.svg}}
 <imgcaption Fig-11_V2-Sine-DC-Offset-2,5kHz-U-4V-UDC-2V | Sine DC Offset, f = 2.5 kHz, U = 4 V, UDC = 2 V> </imgcaption> <imgcaption Fig-11_V2-Sine-DC-Offset-2,5kHz-U-4V-UDC-2V | Sine DC Offset, f = 2.5 kHz, U = 4 V, UDC = 2 V> </imgcaption>
 </wrap> </wrap>
Line 62: Line 63:
  
 ~~PAGEBREAK~~ ~~CLEARFIX~~ ~~PAGEBREAK~~ ~~CLEARFIX~~
 +----