Unterschiede

Hier werden die Unterschiede zwischen zwei Versionen angezeigt.

Link zu dieser Vergleichsansicht

lab_electrical_engineering:hints_for_electrical_setups [2026/03/03 05:05] – angelegt mexleadminlab_electrical_engineering:hints_for_electrical_setups [2026/03/03 05:06] (aktuell) – mexleadmin
Zeile 17: Zeile 17:
       - If you place through-hole components on the breadboard, try to mount them as flat and short as possible so you still have space for components placed across and for additional connections.       - If you place through-hole components on the breadboard, try to mount them as flat and short as possible so you still have space for components placed across and for additional connections.
       - If you use ICs ("chips") on the breadboard, be sure to add 100 nF capacitors close to the supply pin. Clocked ICs can disturb the supply voltage, and the capacitor can reduce this significantly.       - If you use ICs ("chips") on the breadboard, be sure to add 100 nF capacitors close to the supply pin. Clocked ICs can disturb the supply voltage, and the capacitor can reduce this significantly.
-      - Further tips on using the breadboard can be found at [[https://www.mikrocontroller.net/articles/Steckbrett|mikrocontroller.net]] and in the [[https://www.projektlabor.tu-berlin.de/menue/onlinekurs/testaufbau/wie_funktioniert_ein_steckbrett/|TU Berlin Projektlabor]].+      - Further tips on using the breadboard can be found at [[https://www.mikrocontroller.net/articles/Steckbrett|mikrocontroller.net]].
   - Power supply   - Power supply
       - before you connect the power supply, you should       - before you connect the power supply, you should