Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision		 Previous revision
lab_electrical_engineering:triangle-to-rectangular_conversion_schmitt_trigger [2026/06/17 13:29] – mexleadminlab_electrical_engineering:triangle-to-rectangular_conversion_schmitt_trigger [2026/06/17 15:01] (current) – mexleadmin
Line 32: Line 32:
 threshold at the input is reached. It only switches to $\mathrm{-}U_\mathrm{sat}$, when the threshold at the input is reached. It only switches to $\mathrm{-}U_\mathrm{sat}$, when the
 negative switching threshold at the input is reached. negative switching threshold at the input is reached.
 +\\
 ~~PAGEBREAK~~  ~~PAGEBREAK~~ 
 ====Experimental Tasks==== ====Experimental Tasks====
Line 56: Line 57:
       * Connect channel 1 on the oscilloscope to 𝑈𝑒 and channel 2 to SQ.        * Connect channel 1 on the oscilloscope to 𝑈𝑒 and channel 2 to SQ. 
       * Connect the function generator to the Ue input. Set it to triangle with a frequency of 1kHz and a voltage of 3 V (amplitude).        * Connect the function generator to the Ue input. Set it to triangle with a frequency of 1kHz and a voltage of 3 V (amplitude). 
-      * Sketch the oscilloscope screen image.  ~~CLEARFIX~~ \\  **Ue = 3 V (amplitude), f = 1 kHz**\\ \\ <wrap left>{{drawio>oscilloscope_screen.svg}}</wrap>\\ \\ \\ Channel 1: $\frac {Volt}{Div}=$\\ \\ Channel 2: $\frac {Volt}{Div}=$\\ \\ \\ Time basis: $\frac {T}{Div}=$ ~~CLEARFIX~~ \\ \\ \\ \\ +      * Sketch the oscilloscope screen image.   
-  - Sketch the oscilloscope screen image you would expect for 1 V (amplitude). \\ \\ **Ue = 1 V (amplitude), f = 1 kHz**\\ \\ <wrap left>{{drawio>oscilloscope_screen.svg}}</wrap>\\ \\ \\ Channel 1: $\frac {Volt}{Div}=$\\ \\ Channel 2: $\frac {Volt}{Div}=$\\ \\ \\ Time basis: $\frac {T}{Div}=$ ~~CLEARFIX~~ +~~CLEARFIX~~  
-  - Compare your measurements with the calculation from sub-task 1 and the forecast from 2. Explain the results. \\ \\ \\ \\ \\ \\ \\ \\ \\ +\\  <wrap outdent> **Ue = 3 V (amplitude), f = 1 kHz**</wrap> 
 +\\ \\ <wrap left>{{drawio>oscilloscope_screen.svg}}</wrap>\\ \\ \\ Channel 1: $\frac {Volt}{Div}=$\\ \\ Channel 2: $\frac {Volt}{Div}=$\\ \\ \\ Time basis: $\frac {T}{Div}=$ ~~CLEARFIX~~ \\ \\ \\ \\ 
 +  - Sketch the oscilloscope screen image you would expect for 1 V (amplitude). \\ \\ **Ue = 1 V (amplitude), f = 1 kHz**\\ \\ <wrap left>{{drawio>oscilloscope_screen.svg}}</wrap>\\ \\ \\ Channel 1: $\frac {Volt}{Div}=$\\ \\ Channel 2: $\frac {Volt}{Div}=$\\ \\ \\ Time basis: $\frac {T}{Div}=$ ~~CLEARFIX~~ \\ \\ \\ \\ 
 +  - Compare your measurements with the calculation from sub-task 1 and the forecast \\ Explain the results. \\ \\ \\ \\ \\ \\ \\ \\ \\ 
  
  
Line 64: Line 68:
 ====Test Questions - Schmitt Trigger==== ====Test Questions - Schmitt Trigger====
 </WRAP> </WRAP>
 +~~PAGEBREAK~~