Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision		 Previous revision
lab_electrical_engineering:triangle-to-rectangular_conversion_schmitt_trigger [2026/06/18 08:59] – mexleadminlab_electrical_engineering:triangle-to-rectangular_conversion_schmitt_trigger [2026/06/18 09:04] (current) – mexleadmin
Line 56: Line 56:
   - Set up the Schmitt Trigger on the MEXLE-Board. Perform the following measurements on the Schmitt Trigger:    - Set up the Schmitt Trigger on the MEXLE-Board. Perform the following measurements on the Schmitt Trigger: 
       * Connect channel 1 on the oscilloscope to 𝑈𝑒 and channel 2 to SQ.        * Connect channel 1 on the oscilloscope to 𝑈𝑒 and channel 2 to SQ. 
-      * Connect the function generator to the Ue input. Set it to triangle with a frequency of 1kHz and a voltage of 3 V (amplitude). +      * Connect the function generator to the Ue input. Set it to triangle with a frequency of 1kHz and a voltage of 10 V (amplitude). 
       * Sketch the oscilloscope screen image.         * Sketch the oscilloscope screen image.  
 ~~CLEARFIX~~  ~~CLEARFIX~~ 
-\\  <wrap outdent> **Ue = 3 V (amplitude), f = 1 kHz**</wrap>+\\  <wrap outdent> **Ue = 8 V (amplitude), f = 1 kHz**</wrap>
 \\ \\ <wrap left>{{drawio>oscilloscope_screen.svg}}</wrap>\\ \\ \\ Channel 1: $\frac {Volt}{Div}=$\\ \\ Channel 2: $\frac {Volt}{Div}=$\\ \\ \\ Time basis: $\frac {T}{Div}=$ ~~CLEARFIX~~ \\ \\ \\ \\ \\ \\ <wrap left>{{drawio>oscilloscope_screen.svg}}</wrap>\\ \\ \\ Channel 1: $\frac {Volt}{Div}=$\\ \\ Channel 2: $\frac {Volt}{Div}=$\\ \\ \\ Time basis: $\frac {T}{Div}=$ ~~CLEARFIX~~ \\ \\ \\ \\
-  - Sketch the oscilloscope screen image you would expect for 1 V (amplitude). \\ \\ **Ue = 1 V (amplitude), f = 1 kHz**\\ \\ <wrap left>{{drawio>oscilloscope_screen.svg}}</wrap>\\ \\ \\ Channel 1: $\frac {Volt}{Div}=$\\ \\ Channel 2: $\frac {Volt}{Div}=$\\ \\ \\ Time basis: $\frac {T}{Div}=$ ~~CLEARFIX~~ \\ \\ \\ \\+  - Sketch the oscilloscope screen image you would expect for 8 V (amplitude). \\ \\ **Ue = 8 V (amplitude), f = 1 kHz**\\ \\ <wrap left>{{drawio>oscilloscope_screen.svg}}</wrap>\\ \\ \\ Channel 1: $\frac {Volt}{Div}=$\\ \\ Channel 2: $\frac {Volt}{Div}=$\\ \\ \\ Time basis: $\frac {T}{Div}=$ ~~CLEARFIX~~ \\ \\ \\ \\
   - Compare your measurements with the calculation from sub-task 1 and the forecast \\ Explain the results. \\ \\ \\ \\ \\ \\ \\ \\ \\    - Compare your measurements with the calculation from sub-task 1 and the forecast \\ Explain the results. \\ \\ \\ \\ \\ \\ \\ \\ \\